Vortex flowmeter installation precautions
Time： 2020-02-20 12:02:51 Click：0
Vortex flowmeter installation precautions is the following:
(1) If the liquid is measured, the vortex flowmeter should be installed on the pipeline where the medium to be measured should be completely filled.
(2) When the vortex flowmeter is to be installed on a horizontally laid pipeline, then the effect of the temperature of the measured medium on the measurement results, such as the effect on the transmitter, should be considered, which will affect the final Accuracy of measurement results.
(3) When the vortex flowmeter is to be installed on a vertical pipe, if the gas is measured, the fluid at this time can take any direction, and if the liquid is measured, then the liquid direction at this time It should be flowing from bottom to top.
(4) The vortex flowmeter should be installed in a stable place, it is better not to install near the source of vibration, and away from the place of vibration.
(5) When gas is predicted or detected in the liquid, then a deaerator must be installed.
(6) The vortex flowmeter should be installed in a place that will not cause vaporization of the liquid. Cozuo Instruments provides a flange-filled silicone oil device for external processing of flanges and remote flanges.
(7) The difference between the inner diameter of the straight pipe section before and after the vortex flowmeter and the inner diameter of the flowmeter should be less than 3%.
(8) Where the detection element may be damaged, then the vortex flowmeter installed in the pipeline needs to be added with front and rear shut-off valves and bypass valves. Plug-in vortex flowmeters must be equipped with cut-off ball valves.
Vortex flowmeterInstallation diagram
Article from：yibiaohui
TheVortex flowmeteris one of the main products of the NOIKE. For more information, please visit the product page orZANKE staff.
∷
